Page 6 of 8
Qd-00029.doc
Version 12.06.07
Setting alarm
Press the Victorinox emblem for
4
seconds until
the display flashes. Release the Victorinox
emblem again. You have now changed over to
the alarm setting mode.
By pressing the Victorinox emblem briefly while
the display is flashing, the alarm can be switched
on or off. When it is switched on (On), the symbol
appears in the display.
In the "On/OFF" setting mode, press the Victori-
nox emblem again for
4
seconds until the display
flashes. Now release the Victorinox emblem. You
have changed over to the setting mode sub-
menu.
The arrow indicates the present setting direction.
The change takes place automatically.
If the Victorinox emblem is pressed for longer (at
least
6
seconds), the adjustment speed is in-
creased (20 digits/s).
Brief pressure on the Victorinox emblem causes
the display to change by one digit in the arrowed
direction.
If the button is not pressed within
10
seconds,
the setting mode is quit automatically and the
new display is accepted.
Switching the alarm off
When the alarm sounds, it can be switched off by
applying brief pressure to the Victorinox emblem.
The alarm acknowledgement takes priority in all
menus (even in the setting menus). For example,
if a button is pressed in a setting mode and the
alarm is actuated, the button can be released,
acknowledged with a brief pressure and the
action begun previously repeated again.
Deactivating the alarm
Press the Victorinox emblem for
4
seconds until
the display flashes. Release the Victorinox
emblem again. You have now changed over to
the alarm setting mode.
Brief pressure on the Victorinox emblem causes
the alarm to be switched off (OFF). The sym-
bol in the display goes out.
If the button is not pressed within
4
seconds, the
setting mode is quit automatically.
