Page 1 of 8
Qd-00029.doc
Version 12.06.07
CH-6438 Ibach-Schwyz, Switzerland
Tel.
+41 (0)41 81 81 211
Fax
+41 (0)41 81 81 511
Internet
www.victorinox.com
Operating instructions and product features
Initial startup (m, °C, 24h)
The functions of the Traveller can be checked
when the battery is inserted:
> Segment check
Do all segments light up?
> Beep tone
Is a sound heard?
> Background lighting
Is the light switched on
briefly?
After this automatic function test, the present
altitude is first displayed briefly after which the
display changes over to the time mode. The
European system of units (height = m, tempera-
ture = °C, time mode = 24h) is already preset.
Initial startup (ft, °F, 12h)
To set the American system of units (height = ft,
temperature = °F, time mode = 12h). Insert new
battery, press the Victorinox emblem while
closing the battery compartment. The function
test then takes place as described above.
C
= continuous pressure
Choice of menu
Press the Victorinox emblem briefly to select the
desired menu.
If the button is not pressed for more than 30 min
in the "Altimeter", "Alarm" and "Temperature"
menus, the display automatically reverts to the
time mode.
Background lighting
Press the Victorinox emblem for
1.5
seconds to
switch the background lighting on. The light goes
out again
3
seconds after the last actuation. The
background lighting is automatically switched off
on changeover to the setting mode (except in the
alarm function).
Traveller
Traveller Lite
Expedition Lite
