Victoria VITTORIA 8, Instruction Manual

Page: 18 / 24

Victoria-05 Ltd.
18
14.Check list.
Location and installation:
- Ventilation of the room;
- Only the flue outlet of the pellet stove is connected to the chimney;
- Connecting flues pipes have a horizontal section with a length of 2 m, minimum slope of 3%, not more than two
curves at 90° and a vertical section with a length of less than 1.5 m ;
- Connecting flues pipes are made of suitable material. It is recommended stainless steel;
Operation:
- Well dried and of good quality wood pellets. Diameter of Ø 6 mm and maximum moisture content of 8%;
- Chimney, connecting flue pipes and combustion chamber are clean;
- Flue outlet pipes are clean.
15.Frequently Asked Questions.
The following answers are tentative. For more details, use the instruction manual.
- What is need to prepare and do before installing the pellet stove?
Chimney with a diameter of at least 80 mm.
Opening for fresh air with a cross section not less than 80 cm
2
.
Power supply 230V (+/- 10%), 50Hz.
- Can the flue gasses be sent out directly through the wall?
NO. Removal must be in accordance with existing standards. For proper operation of the pellet stove the chimney
(metal or masonry has to be completed by one of the proposed variants at Fig. 3.1. It must provide protection from wind.
- Is it required to ensure fresh air supply in the room?
- Yes, external air supply ensures fresh air for the burning process. Fume extractor pulls air from the room to the
combustion chamber.
- What settings does the control panel of pellet stove need?
Setting for the desired room temperature. Pellet stove will regulate the power to that temperature. The installer must
make the appropriate setting.
- How often the combustion chamber should be cleaned?
Before each ignition of the pellet stove, but only when it is turned off and cold.
- May you clean the pellet fuel hopper with a vacuum cleaner?
Yes, at least once a month or if the pellet stove has not worked for a long time.
- Can you use other types of fuel than wood pellets?
NO. Pellet stove is designed to work with wood pellets with a diameter of Ø 6 mm. The use of another type of fuel leads
to damage.