13
4.Put wiring cover back and then tighten the screw.
5.Close the panel.
Installation of indoor unit
Note:
●
All wires of indoor unit and outdoor unit should be connected by a professional.
Connect main power wires and conduit to unit disconnect switch box per
manufacturer’s instructions, National Electrical Code (NEC) and local electrical
codes.
for a new one. Avoid extending the wire by yourself.
installation.
● For the air conditioner without plug, an
circuit break must be installed in the line.
The circuit break should be all-pole parting and the contact parting distance
should be more than 1
/8in
.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
with wire clip.
power connection
wire
cable-cross
hole
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
2
3
N(1)
2
3
N(1)
L1 L2 G
Outdoor unit connection
18
、
24K:
(230V)
2
3
N(1)
2
3
N(1)
L
N
Outdoor unit connection
09
、
12K:
(230V)
09
、
12K(1
15V
):
2
3
GND
N(1)
Outdoor unit connection
L2
L1
2
3
N(1)
GND
GND
GND
Outdoor
unit connection
GND
GND
2
3
L1 L2
N(1)
G
S
L2
’
L1
’
G
For some units
1
8
K(
2
30
V
):
