3.
Raise the drill motor to its highest position by
rotating the feeder knob counterclockwise .
4.
Insert the hex-shaped end of the arbor
assembly into the chuck .
5.
While supporting the arbor assembly, tighten
the chuck securely with the chuck key provided .
6.
Place the hole cutting tool onto the pipe/
tubing . Wrap the chain around the pipe/tubing
and insert is loosely into the chain slot on the
tool’s base . Leave the chain loose enough to
permit movement of the tool base .
7.
Align the hole saw’s drill bit with the center
punch mark .
8.
Using the vice handle, tighten the chain to
secure the hole cutting tool .
10
REV_C
TM-HCT908
/ Operating and Maintenance Instructions Manual
Summary of Contents for TM-HCT908
Page 2: ......
