INTRODUCTION
NOTICE
• Drawings and/or pictures in this manual
may be exaggerated for clarity.
• The tool, along with this operating
and maintenance instructions manual,
contains trademarks, copyrights, and/or
patented features that are the exclusive
property of Victaulic Company.
The Victaulic HCT908 Hole Cutting Tool is
specifically designed to cut holes in carbon steel
and stainless steel pipe and copper tubing
for branch connections using Victaulic
Hole Cut Products . This tool is not designed
for use on cast iron pipe, HDPE, or PVC
plastic pipe . Never use the tool to cut anything
but the intended materials . The HCT908 is
suitable for 1
1/4
– 8 inch/42 .4 – 219 .1 mm pipe/
tubing sizes and can cut up to 2
3/4
inch/70 mm
hole sizes .
CAUTION
• This tool must be used ONLY for grooving
pipe/tubing with specifications that fall
within the designated parameters.
Failure to follow this instruction could
overload the tool, resulting in reduced tool
life, tool damage, or personal injury.
RECEIVING THE TOOL
HCT908 Hole Cutting Tools are packed
individually in sturdy containers . Upon receipt
of the tool, ensure that all necessary parts
are included . If any parts are missing, contact
Victaulic .
NOTE:
If the tool is rented, save the
container for return shipment .
CONTAINER CONTENTS
Qty.
Description
1
Drill Motor Assembly with Chuck Key
1
Extra Pilot Drill with Coupon Saver
1
Arbor Assembly
1
Coupon Removal Tool
2
Operating and Maintenance Instructions Manual
NOTE:
Hole saws must be ordered separately . A
permanent carrying case is available and can be
ordered separately .
RETURNING THE TOOL
Prepare tool for shipment as received . Contact
Victaulic with questions .
6
REV_C
TM-HCT908
/ Operating and Maintenance Instructions Manual
Summary of Contents for TM-HCT908
Page 2: ......