Vicpas UniOP BKDC-46, Installation Manual

Page: 53 / 63

Installation Guide
49
Usage and Safety Guidelines
Applicable Regulations
Regulations and recommendations have been issued in Europe covering the main
safety-related issues in control systems which include operator interfaces.
EN 60204-1 lists some important guidelines applicable when using operator
interfaces.
9.2.4
Suspension of safeguards
9.2.5.3 Stop
9.2.5.4 Emergency stop
9.2.5.6 Hold-to-run controls
9.2.5.7 Two-hand controls
9.4 Control function in case of failure
Do not use operator interface to directly command motors, valves or other actuators
not equipped with safeguards and potentially harmful to persons or equipment in case
of fault to the unit.
The units are intended to be monted on the front panel of a metallic cabinet. The
service personnel, when operating directly on the powered unit, must be
electrostatically discharged.
All safety related regulations must be observed
CAUTION! Don’t open the panel rear cover when the power supply is applied.
Installation Environment
The equipment is not intended for continuous exposure to direct sunlight This might
accelerate the aging process of the front panel film.
The equipment is not intended for installation in contact with corrosive chemical
compounds. Check the resistance of the front panel film to a specific compound
before installation.
Do not use tools of any kind (screwdrivers, etc.) to operate the keyboard of the panel
or the touch screen.