028-0506-02_II-VZ8250_EN www.viconics.com
January 2020
3
VZ8250
[
Installation Guide
]
1. SAFETY INFORMATION
1.1
IMPORTANT INFORMATION
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service
or maintain it. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or
to call attention to information that clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result
in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
DANGER
DANGER
indicates a hazardous situation which, if not avoided,
will result in
death
or serious injury.
WARNING
WARNING
indicates a hazardous situation which, if not avoided,
could result in
death
or serious injury.
CAUTION
CAUTION
indicates a hazardous situation which, if not avoided,
could result in
minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury. The safety alert symbol shall not be used with this signal word.
1.2
PLEASE NOTE
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is
assumed by Viconics Technologies for any consequences arising out of the use of this material.
A qualified person is one who has skills and knowledge related to the construction, installation, and operation of electrical equipment
and has received safety training to recognize and avoid the hazards involved.