12 | VWG-50-Installation Manual
The packing slip accompanying the VWG will provide the “factory-shipped” IP settings for
both NET1 and NET2. Refer to the document LIT-VWG-50-SETUP-Exx for more
information
for details on the default IP address and how to change it.
The supplied ferrite in the VWG packaging needs to be installed on the IP wire in
a specific way for FCC compliance. Place IP wire into the provided ferrite as shown in
diagram below and make sure to follow the placement dimension. Close and snap the
ferrite casing as shown.
Wire IP cable into NET1 or NET2 as per configuration.
