Installation and Operation Guide
|
9
The Quick Playback buttons provide playback for 15, 30, 60 and 90 seconds.
1. Select the quadrant (camera) for playback. The quadrant will be
outlined with pink border.
2. Press the Quick Playback button for the desired number of seconds of
playback.
Multi-screen displays are possible on Kollectors/NVRs/WS. Pressing the Full
Screen button commands the Kollector/NVR/WS to display the previously
selected quadrant or camera full screen.
To store presets:
1. Position the camera to desired location.
2. Enter the preset number to store, press and hold the Shift key and
click the preset key.
To activate presets:
1. Preset positions are recalled by entering the preset number from the
numeric keypad and pressing the Preset key
Using the PTZ and other lens functions on the controller:
1. To move the pan-and-tilt device in a horizontal (pan) or vertical (tilt)
motion, deflect the joystick in the direction desired; moving the joystick
in a diagonal motion provides simultaneous pan and tilt.
2. To control zoom, twist the top of the joystick clockwise to zoom in;
turning it in a counter-clockwise direction will zoom out.
3. Focus (near and far) and Iris (open and close) are controlled pressing
the appropriate push button located next to the joystick.
4. Use the Lens Speed key to cycle through the lens speeds.
5. To use autopan or autoiris functions, press the appropriate key A/P or
A/I.
Auxiliary relays are actioned by selecting the auxiliary relay number from the
numeric keypad and pressing the Aux key. Note that momentary aux functions
stay active as long as the key button is pressed; latching relays remain active
until the button is pressed again.
Macros must be named with a number in ViconNet if they are to be recalled by
the keypad. The number can be from 1-999.To recall macros programmed at
the Kollector/NVR/WS, enter the macro number via the numeric keypad and
press the START MACRO button; press STOP MACRO to halt the macro.
Macros must be previously defined.
Control buttons are provided to Play and Pause video. The Jog/Shuttle
provides for Frame Advance and Frame Reverse as well as Fast Forward and
Reverse.