8
|
Installation and Operation Guide
Operation
The VN-KEYPAD provides control access to NVRs/Workstations/Kollectors,
including multi-screen controls, video controls, Quick Playback and macro
selection. Controls also include standard PTZ, preset selection and
camera/monitor select actions. NVRs/Workstations/Kollectors are configured
within the ViconNet system. Refer to the appropriate Kollector and ViconNet
documentation as needed.
There are buttons on the left side for Quick Playback, as well as alarm
acknowledgement, auxiliary relay selection and preset selection. A CANCEL
button is also provided. On the right side, there are buttons for autopan (A/P),
autoiris (A/I), lens speed, pan-and-tilt (P/T) speed and lens focus (NEAR/FAR)
and iris (OPEN/CLOSE) control. At the top, buttons for starting/stopping
macros and playing and pausing video are provided. At the bottom, there are
buttons providing options for the video layout on the ViconNet main screen,
including Full Screen, and a button that selects the quadrant of video that is
being controlled.
Note
The CHANGE MODE button is only used when working with VMDC. The
SHIFT button is for advanced use.
When connected to a ViconNet station, the monitor does not need to be
selected (there is only one monitor); proceed to step 3. When connected to a
VMDC with multiple monitors, the required monitor needs to be selected first.
1. Select a Monitor by entering its number via the numeric keypad and
then pressing the Monitor key on the keypad (VMDC in ViconNet mode
is numbered “0” and the other monitors are numbered in the monitor
layout settings in VMDC).
2. All further commands are directed to the target monitor.
3. To select a layout on the selected monitor, choose 1, 4, 6, 9 or 16
video displays in ViconNet (10, 25, 36 and 64 video segments are
additionally available in VMDC). Press the desired display number on
the numeric keypad and then press the LAYOUT button.
4. To select a quadrant for action, enter the quadrant number via the
numeric keypad (top left quadrant is number 1, counting to the right
and down) and press the QDRNT key from the bottom row of keys. All
further commands are directed to the selected quadrant. The selected
quadrant is highlighted with a pink border.
5. To start a camera in a selected quadrant, enter the camera number via
the numeric keypad and press the Camera button. If the camera is a
PTZ, all PTZ actions are directed to this camera until a new camera is
selected, a different quadrant is selected or a different
Kollector/NVR/WS is targeted.