EXIT
CHROMA
MENU
PHASE
BRIGHT
CONTRAST
VOLUME/SELECT
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
• H. POSITION
• CONTROL LOCK
• INPUT REMOTE
• WHITE BALANCE
• STATUS DISPLAY
• ASPECT REMOTE
You can set the following set-up menu items.
1. While pressing the MENU button, press the
CHROMA/PHASE button.
The <SET-UP MENU> screen is displayed.
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (
4
) is put next to the selected item.
3. Press the VOLUME/SELECT buttons to set.
●
To adjust the white balance, select WHITE BALANCE and
press the VOLUME/SELECT (+) or (–) button to display the
CUT OFF or DRIVE setting screen, then adjust each setting.
●
Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
Notes:
<SET-UP MENU> screen
<Front panel buttons>
1
Selection mark (
4
): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
Forwards the menu item.
Reverses the menu item.
–
Lowers the adjustment
value (to the minimum).
+
Raises the adjustment
value (to the maximum).
4
Forwards the setting value.
1
Reverses the setting value.
EXIT
Exits the <SET-UP
MENU> screen (release).
DRV
Selects DRIVE adjustment.
CUTO
Selects CUT OFF
adjustment.
RB
Adjusts red and blue
signal level.
RGB
Adjusts red, green and
blue signal level.
DISP
Turns the ON-SCREEN
display on or off. (This
function is effective only in
the DRIVE or CUT OFF
adjustment mode.)
Front panel
Function
Contents
button
displayed
CHROMA/
Forwards selection mark (
4
)
PHASE
CONTRAST/
Reverses selection mark (
4
)
BRIGHT
Front panel
Function
Contents
button
displayed
+
Increases (to max. value)
4
Forwards the setting value
CUTO
Selects CUT OFF setting screen
–
Decreases (to min. value)
1
Reverses the setting value
DRV
Selects DRIVE setting screen
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
●
Parameter for H. POSITION can be set separately depending on the video input
(Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front
panel.
Select the required video input with the input select buttons on the front panel in
advance.
Note:
<SET-UP MENU>
‰
H. POSITION
: 00
WHITE BALANCE
CONTROL LOCK
: OFF
STATUS DISPLAY
: ON
INPUT REMOTE
: OFF
ASPECT REMOTE
: OFF
1
2
3
4
9
H. POSITION
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
MENU
CHROMA
PHASE
CHROMA
PHASE
BRIGHT
CONTRAST
VOLUME/SELECT
LCT1275-001A-H
02.08.06, 3:06 PM
11
