Vicon VC2650-DSP, Installation And Operation Manual

Page: 42 / 86

and
Selecting the Main Menu Item
In order to select the values on the Main menu, the cursor has to move to
select that main menu. This is done by pushing the Up/Down switches.
It is easy to identity which menu has the cursor on that menu because
that menu blinks. Whenever the “SETUP” menu screen is first activated,
the “LENS menu blinks on the screen, because the cursor is preset
at the “LENS menu when the <Setup> screen is first activated.
Displaying the
In order to enter into the items with marks, first move the cursor to
select that item, then push the [Enter] switch. If there are items with
marks on the submenu screen, then that indicates additional submenus.
To select these submenus, use the [Enter] switch again as instructed
previously.
Returning to the Main Menu Screen
In order to return to the main menu screen, select the “RET” item among
the submenu items.