27
Factory Settings
V940D Series cameras provide an online reset function, which greatly facilitates
reset adjustment.
Select “Keep current IP unchanged,” click “Reset” button and the system will
pop up the message to confirm factory reset:
Figure 4-
9
Click “OK;” all the parameters (excluding IP address) will be reset to the factory
default settings.
If “Keep current IP unchanged” is unselected, the IP address will be reset to
DHCP mode.
There is time prompt in the web page during reset. After reset, a new web page
will open.
Note:
1.
To avoid any errors, the online reset function operation should be performed
under qualified personnel’s guidance.
2.
Do not power off during reset or the reset will fail.
Online Reboot
Click “Reboot” button; the dialog box “This operation will take 90 seconds, are
you sure to continue
？
” will pop up. Click “OK” and the system will restart.
There is a time prompt in the web page during reboot. After reboot, a new web
page will open.
Note:
This is only available for the admin.
