Vicon V840D Series, User Manual

Page: 10 / 59

5
Initial Configuration
After you log in to the device, perform the following initial configuration.
Item Description
1. Ethernet .
Reconfigure the device IP and network parameters based on
the actual networking.
2. Log out and log in again to the Web
using the new IP address.
-
3. Set the system time . Set the system time based on the actual situation.
4. (Optional) Set the management
server
.
Set the management server based on the actual networking.
5. (Optional) Set the server for storing
photos. Set the server for storing photos based on the actual
networking.
6. Set OSD .
Set the information displayed on the screen as needed, for
example, time.
7. (Optional) Manage users .
Change the default password and add common users as
needed.
You can view the live video after finishing the initial configuration. Configure other parameters as needed;
details follow.
NOTE!

The parameters that are grayed out cannot be modified. For the actual settings, see the Web
interface.

It is recommended that you change the password after you log in the first time. For details about
how to change a password, see
Security .
3
Configuring Parameters
Local Parameters
Set local parameters for your PC.
1. Select Setup > Common > Local Settings.