Vicon V739, Installation & Operation Manual

Page: 10 / 14

6
MODEL V739
TABLE 2: RECEIVER LED DIAGNOSTIC INDICATORS
TABLE 1: TRANSMITTER LED DIAGNOSTIC INDICATORS
LED Name Color Indicates/ Corrective Action
Green Sufficient optical power received. No action required.
LEVEL/
LOSS 
Red
Optical power not being received. Fiber open or transmitter or receiver inoperative.
Check fiber loss, connectors, and splices (if any). On two-fiber units, verify TX port
connects to RX port.
Green
Video coax input to link is good. (Note that even a totally black screen is a valid
video signal.)
No action required.
VIDEO IN
Red Video coax input to link is not good. Check the camera and the coax into the link.
Green Indicates PTZ command transmission (greater than 250 mV). No action required.
CMND OUT
Off No activity or command being transmitted is less than 250 mV.
Green Indicates response from camera is greater than 250 mV. No action required .
RESP IN
Off
No response from camera or signal is less than 250 mV. This may indicate a
problem with the camera. This function is not available in all systems.
Green
Indicates transmission of Genlock Synchronization signals greater than 2 volts,
where applicable.
SYNC OUT
Off No Genlock Synchronization signal received or level is less than 2 volts.
LED Name Color Indicates/ Corrective Action
Green Sufficient optical power received. No action required.
LEVEL/
LOSS

Red
Optical power not being received. Fiber open or transmitter or receiver inoperative.
Check fiber loss, connectors, and splices (if any). On two-fiber units, verify TX port
connects to RX port.
Green
Valid video signal received. (Note that even a totally black screen is a valid video
signal.)
No action required.
VIDEO OUT
Red
No video signal received . Check the camera and coax. Check the LEVEL/LOSS

indicator. If the indicator is green, check the VIDEO LED on the transmitter.
Green Indicates PTZ command transmission (greater than 250 mV). No action required.
CMND IN
Off No activity or command being transmitted is less than 250 mV.
Green Indicates response from camera is greater than 250 mV. No action required .
RESP OUT
Off
No response from camera or signal is less than 250 mV. This may indicate a
problem with the camera. This function is not available in all systems.
Green
Indicates transmission of Genlock Synchronization signals greater than 2 volts,
where applicable.
SYNC IN
Off No Genlock Synchronization signal received or level is less than 2 volts.