background image

IMPORTANT SAFETY INSTRUCTIONS  

 

1. Read these instructions

2. Keep these instructions

.

3. 

Heed all warnings. 

4. Follow all instructions. 
5. Do not block any ventilation openings. Install in accordance with the manufacturer’s  
     instructions. 
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other 
    apparatus (including amplifiers) that produce heat. 
7. Only use attachments/accessories specified by the manufacturer. 
8. Use only with the cart, stand, tripod, bracket, or table specified by 
    The manufacturer, or sold with the apparatus. When a cart is used, 
    Use caution when moving the cart/ apparatus combination to avoid 
    Injury from tip-over. 

 9. CAUTION – THESE SERVICING IN STRUCTIONS ARE FOR USE BY QUALIFIED    
     SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO  
     NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE     
    OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. 
 10. Use satisfy clause 2.5 of IEC60950-1/UL 60950-1 or Certified/Listed Class 2  
       power source only. 
 

11. Indoor use only. 

 

 

EXPLANATION OF GRAPHICAL SYMBOLS 

 

 

 

                

The lighting flash with arrowhead symbol, within an equilateral triangle, is  

     Intended to alert the user to the presence of uninsulated “dangerous voltage” 
     within the product`s enclosure that may be of sufficient magnitude to constitute 

a risk of electric shock to persons. 

 
 
     The exclamation point within an equilateral triangle is intended to alert the user 
      to the presence of important operating and maintenance (servicing)  
      instructions in the literature accompanying the appliance. 

 

LIMITATION OF LIABILITY 

 
THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL 
RESPECTS; HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY 
CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION 
CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR 
NEW

 

EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE SUCH 

CHANGES.

Summary of Contents for V672B

























Reviews: