13
5. 6 Event Log
Record of the events, up to 220 events ( P-ON, PGM, ALM, V/L, A-CLR, ALM RS).
Program event is only recorded when the contents are changed.
If the event log is full filled with 220 events, recording will be stopped and “
EVENT FULL
” message appears
until the event log are deleted.
l
To check or delete the event log, select
EVENT LOG
on the
MAIN MENU
screen.
l
Press
TITLE
&
VCR
key to delete the full-filled event log and the “
ALL EVENTS CLEARED
” message will
appear.
5.7 Password Set
l
Select
PASSWORD
SET
on the
MAIN MENU
.
l
Press the Enter key. The following menu is displayed:
l
Press Enter key to toggle options:
ENABLE
DISABLE
5.7.1 Set the Password
The unit incorporates a password function for entry to the menu operation. This ensures that only authorized
persons can change the unit’s settings.
l
Select
PASSWORD
setting as
ENABLE
and then select
NEW PASSWORD
on the
PASSWORD SETTING
menu.
l
Press the Enter key to set the password. The following menu is displayed:
l
Enter a Password of 4 digits.Confirm the same password again.
l
“PASSWORD SETTING”
displayed if entered password is correct.
l
After setting the password, the password is required to enter the main menu for programming.
l
When a correct password is entered, the main menu is displayed. Otherwise,
“Wrong Password”
displays
for 3 seconds. If password is failed three times continuously, it returns to the display screen.
PASSWORD SETTING
(1) PASSWORD : DISABLE
(2) NEW PASSWORD
(3) EXIT
????
ENTER PASSWORD