background image

 

4

Programming Function 

 
All programming is done with the front panel keys. There are thirteen keys on the front panel. The key named 

MENU, 1/ , 2/ , 3/ , 4/ , 

and 

QUAD/ENTER

 are used in programming units

 

The 

TITLE, VCR, ALM, ZOOM, FRZ,

 

PIP 

and

 SEQ

 keys are not used in programming the unit. Functions of 

each key on the front panel are described in Table 1. 

 Scrolls upward through program selections ; selects entries. 
 Scrolls downward through program selections ; selects entries. 

Enter or set function 

Press the 

MENU

 key to display the programming screen. The following is displayed: 

 
 

 
 
 
 
 
 
 
 
 
 
 

 
 

5.1 

Time/Date 

 

This menu allows you to setup the time and date of the video display and the quad screen. 

Select 

TIME/DATE 

on the Main Menu and press Enter key. The following menu is displayed: 

 
 
 
 
 
 
 
 
 
 
 
 
 

5.1.1  

Time Format 

 

Select 

TIME FORMAT

 and press the Enter key. The following menu is displayed: 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

MAIN MENU 

(1) TIME/DATE 
(2) CAMERA    SETUP 
(3) ALARM     SETUP 
(4) RECORD  SETUP 
(5) DISPLAY    FORMAT 
(6) EVENT  LOG 
(7) PASSWORD SET  
(8) EXIT 

 

 

TIME /DATE 

(1) TIME   

  FORMAT 

(2) DATE   

  FORMAT 

(3) TIME/DATE  SET 
(4) EXIT 

 

 

TIME FORMAT 

 

12 HOURS ( AM / PM ) 

 

 
 
 
  TO EXIT PRESS (ENTER) KEY.

 

Summary of Contents for V5400MUX

























Reviews: