Operating instructions/ Suggested uses
Digital multimeter, Order no. 10002896
Congratulations on purchasing a Rothewald digital multimeter. This is a battery-
powered manual multimeter that can be used for measuring DC and AC
voltages, current strengths and resistances and also for testing diodes.
A protective cover with built-in stand and two test cables are included.
Please follow all the operating and safety instructions to ensure that the unit is
used safely and to keep it in good condition.
Before using this unit with your bike or car, consult your vehicle's repair and
maintenance manual for the requisite measured values and model-specific
measurement instructions.
Improper use of this multimeter may result in damage to the device itself or to
your vehicle!
Control panel
1: 15 mm high LCD display, 3 1/2 digit.
2: Rotary switch for On/Off, and for selecting function and measuring range.
Clockwise rotation selects the following functions / ranges:
Off; AC voltmeter 600 V, 200 V; DC ammeter 20 µA, 200 µA, 2 mA, 20 mA,
200
mA, 10 A; diode testing; ohmmeter 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2 MΩ;
DC voltmeter 200 mV, 2 V, 20 V, 200 V, 600 V.
3: Hold function: if "Hold" is pressed, the display will retain the last measured
value and will indicate this with an "H" symbol until "Hold" is pressed again.
4: 10 A jack, unfused: insert the positive test cable (red) here to measure
currents in the 10 A measuring range.
5: COM jack: insert the negative test cable (black) here.
6: VΩmA jack: insert the positive test cable (red) here to measure voltage,
resistance and DC (up to 200 mA, fused).
