18
3.
Change User Password
Click
button in the list and the Edit User Information dialog
box will pop up.
Figure 3-46
Input the old password, enter your desired new password twice (once
to confirm) and then click “OK” button; a prompt pops up as follows:
Figure 3-47 Edit Password
3.11 System Log
Click “Log” button on the navigation bar to enter the system log
interface as shown below:
Figure 3-48
Up to 30 logs can display on one page. Users can turn over the page
by clicking the arrows at the bottom or skip to the designated page
by clicking “Goto”. To remove a log, click “Delete logs”: a prompt
will display: click “Yes” to clear logs.
Chapter IV PTZ Control and Call Up
4.1 PTZ Control
In Live view interface, click “PTZ control” tab to expand the PTZ
control interface as shown below:
Figure 4-1 PTZ control interface
In the interface, users can perform PTZ control, iris adjustment,
focus/zoom adjustment, and also set the pan and tilt speed.
Press the direction keys, the dome will start to move. Release the key
to stop movement.
buttons are used to adjust iris.
The left
button is used to narrow the iris. The image will
become dim when this button is pressed.
The right
button is used to enlarge the iris. The image will
become bright when this button is pressed.
buttons are used to adjust zoom.
Press
button to zoom out to get the telephoto-images.
Press
button to zoom in to get the close-images.
buttons are used to adjust focus.
Press
button for wide focus, and press
button for
telephoto focus.
The pan and tilt speed can be set in this interface, with 8 different
level options. The higher the level is, the faster the dome moves.
