5
2.1.1 Wall Mounting
The wall mounting plate must be attached to a structural object such as concrete that will support
the weight of the mount and dome camera.
1. Select a suitable mounting location and verify there is sufficient cable to reach the middle of the
Wall Mount.
2. Mark and drill mounting holes in the surface the wall mount flange as a template.
3. Pull out cables required to connect to the dome camera from the wall.
4. Secure the wall mount bracket to the wall using plastic anchors and 8x35 screws or appropriate
for the mounting surface.
5. Remove the cable access plate and route cables through rectangular access hole of the wall
mount bracket.
6. Attach the 1.5 inch adapter to wall mount bracket and fix it using set screw.
7. Attach the camera’s safety wire to the wall mount bracket latch and organize the cables.
8. Reattach the access plate of the wall mount bracket.
9. Push in and turn the camera clockwise into the adapter and fix it using set screw of the adapter.
