38
Operation
Working in angled
position
Watch for obstacles
When driving around obstacles or along fences ensure a sufficient dis-
tance is kept. A collision may cause damage to the implement.
> Switch the PTO shaft on at a low engine speed.
> Select the PTO shaft speed depending on crop output require-
ments.
> Adjust working speed to terrain conditions.
End limit spreading
After the end of limit spreading, the implement must be brought back
to the normal work position before it is folded into the transport posi-
tion. Damage may be caused to the implement.
> Switch off the tractor's PTO shaft.
> Switch off the tractor engine and secure the tractor.
> Take out the ignition key.
> Reset both steering rods as shown in the adjacent illustration.
→
See »Resetting the angled position«, page 30
Steering rod
