66
6) View Angle
• View Angle Setting:
– Tilt angle limit:
This option is designed to limit the view angle as there is some obstruction in
zooming out on specific areas of the tilt angle.
– Flip:
* Off:
The dome camera moves until 90
°
vertically.
* Auto:
When the camera reaches the floor directly above the moving object, it will stop. At
that time, release instantly and pull it down again to run the auto-flip function. When you
use the panning range, it is recommended to use the flip mode to Auto.
* 90, 100, 110, 120:
Allows the image to flip digitally when the camera moves over the setting
angle vertically.
– Enable pan angle range setup:
When the dome camera is installed near a wall, pan angle
range can be limited by user.
* Right limit:
Select the right limit of pan angle range.
* Left limit:
Select the left limit of pan angle range.
When the settings are complete, click
Save
button to save the settings, or click
Reset
button to clear
all of the information you entered without saving it.
Summary of Contents for Cruiser SN663V-B-EX
Page 98: ...Rev A...
