background image

X683 Rev 100 V6-60HS-1 Zoom Lenses 

Introduction  

••

  1 

Introduction 

The information in this manual covers the installation, operation and maintenance of the V6-60HS-1 Series of 
High-Speed Motorized Zoom Lenses. These units should be installed by a qualified technician using approved 
materials in conformance with national, state and local electrical codes. Read these instructions through 
completely before attempting installation. 
 
The V6-60M-HS-1 lens features motorized zoom, focus and iris functions. It is appropriate for indoor use. The 
V6-60MS-HS-1 lens features motorized  zoom, focus, and iris functions and is equipped with a neutral-density 
spot filter to permit use in a wide range of lighting conditions. With this lens, a sensitive camera can operate 
effectively in both partial darkness and high-light-level conditions. The V6-60MS-HS-P-1 has the same features, 
but it adds preset-position potentiometers to the zoom and focus controls. 
 
The V6-60AC-HS-1 lens has the same features as the V6-60MS-HS-1 plus video-drive autoiris operation. This 
additional feature provides optimum viewing contrast regardless of light conditions or brightness variations within 
the scene. In the AC lens, the iris is controlled by a stepping motor, which is virtually unaffected by vibration or 
operating position. The microcomputer iris control provides precise responsive iris operation. The V6-60AC-HS-
P-1 has the same features, but it adds preset-position potentiometers to the zoom and focus controls. Refer to 
Table 1 for a full list of models. 
 
The preset-position option consists of precision potentiometers built into the lens that provide position feedback 
information for zoom and focus to an appropriate control unit. 
 

Table 1 

V6-60HS-1 Models 

Model 

Product Code 

Description 

V6-60M-HS-1 

5860 

Motorized zoom, focus and iris 

V6-60MS-HS-1 

5861 

Motorized zoom, focus and iris; neutral-density spot filter 

V6-60MS-HS-P-1 

5861-01 

Motorized zoom, focus and iris; neutral-density spot filter; preset 
position potentiometers 

V6-60AC-HS-1 

5862 

Motorized zoom, focus; video-drive autoiris; neutral-density spot filter 

V6-60AC-HS-P-1 

5862-01 

Motorized zoom, focus; video-drive autoiris; neutral-density spot filter; 
preset position potentiometers 

 

Summary of Contents for 5860















Reviews: