X683 Rev 100 V6-60HS-1 Zoom Lenses
Installation
••
7
Video Level (LEVEL)
The level control is preset at the factory for optimum performance, so normally no adjustment is required.
Adjusting this control when it is not necessary may spoil the picture quality. If all other adjustments fail to
produce a satisfactory picture, adjust the LEVEL potentiometer. The adjustment limits are low (L) and high (H).
Note:
When making an adjustment, turn the potentiometer a little at a time.
1. Set the camera AGC to OFF.
2. Remove the rubber cap from the potentiometer and adjust it. If the contrast is too strong, turn the
potentiometer counterclockwise, toward L; if the contrast is too weak, turn the potentiometer clockwise,
toward H.
3. Reset the camera AGC to ON.
Figure 3
Lens Adjustment Location
Summary of Contents for 5860
Page 2: ......
Page 3: ......
Page 4: ......
Page 6: ...2 Introduction X683 Rev 100 V6 60HS 1 Zoom Lenses Notes ...
