37
6.
Put and screw the nut
(13) to lock in position all
accessories at the edge
of the milling tube (6).
Warning: Do not over
tighten!
7.
Place and fit the Juice collector tray (14) on the
bracket (10).
8.
Put the bracket cover
(15) on the bracket (10).
9.
Put the feed hopper
(16) on the top of the
milling tube (6)
10.
The appliance is ready
for use.
Note: For disassembling please use the above instructions in reverse order after
you make sure the appliance is not connected to the power supply and is cooled
down.