Vicking electronics
Pag. 2
Overview
Introduction
The WORKmate II is a cost effective data capture terminal for connection to the Vicking Electronics
concentrator network.
It can be used for:
a. Real-time job control, at every workstation, the appropriate information can be entered by the
operator, using the keyboard or the attached barcode reader.
b. Time & attendance applications, the employee can identify himself with a proximity key and request
information with the function keys.
c. Access control applications, a proximity key or card is used to grand access, the relays opens a door,
the keyboard can be used to enter a password.
Technical specifications
•
New stylish housing which you can use as a table or wall model by rotating the top cover.
•
Dimensions: Width 113mm Length 235mm Depth 94mm
•
Weight: 450 gram
•
LCD display with 4 lines of 16 characters with backlighting.
The characters are 5.5 mm high.
•
Splash water proof membrane keyboard with 4x9 keys. (36 keys total)
•
Reads 2/5 interleaved, code 39, UPC and EAN bar-codes.
•
Two switch inputs.
•
Two Transistor outputs.
•
2 LED’s (red, green).
•
Built-in beeper with different tones.
•
Connection to the concentrator network via RJ 45 or a screw connector.
•
Full RS232 serial port.
•
The following readers can be connected to the WORKmate:
•
An internal proximity card reader
•
An external proximity card reader
•
Two barcode wand or CCD barcode readers.
•
Two magnetic card readers (ISO track 2)
•
External power needed: From 8V to 24V DC
•
Optional I/O board
•
Two relays
•
Two opto-isolated inputs with counter possibility.
•
A opto-isolated proximity reader.
•
DIN connector to the concentrator network.
•
Screw connector to the concentrator network.
