4
Machine washable. Cover complies with
EN1021-1, 1021-2 and CAL117.
PRECAUTIONS AND SAFETY
INSTRUCTIONS
A Vicair wheelchair back support cushion may
only be used as a wheelchair back support
cushion. The use of this product in any other
way, is considered to be misuse. Vicair B.V.
cannot be held responsible for damage caused
by misuse, improper use or negligence. Make
sure that you read and understand this manual
completely.
Warning!
Vicair B.V. recommends to install the
Vicair Multifunctional O2 back under direct
supervision of a therapist or technical advisor.
Warning!
Your back and spine should not touch
the bottom/back part of the cushion or the sides
of the shell. Checking for “bottoming out” should
be done during first use and after adjustments
to the cushion filling.
Warning!
Check your skin regularly for redness,
especially during the first few days. If redness
occurs and does not disappear after 15 minutes,
consult your therapist or technical advisor.
Warning!
Vicair B.V. recommends to adjust the
filling grade under the direct supervision of your
therapist or technical advisor.
Warning!
No testing data is currently available
about the safe use of Vicair back support
cushions in motor vehicles. Therefore we do not
encourage using the back support cushion in
motor vehicles.
Warning!
In case of soiling with body fluids, and
when transferring the product to another user,
the product must be disinfected to avoid cross
contamination.
Warning!
Every three months, check the product
for wear and deflated cells. In case of serious
damage or a large number of deflated cells, do
not continue to use the product. Consult your
dealer.
Warning!
Using the Vicair Multifunctional
O2 back may affect the static and dynamic
behaviour of the wheelchair. Check and test the
balance and stability of the wheelchair with the
aid of your therapist or technical advisor.
Caution!
Do not use or leave the product close
to a naked flame or a high temperature heat
source.
Caution!
Do not steam clean or autoclave the
product. The product cannot withstand
excessive heat or pressure. When the given
cleaning instructions are not followed, it is very
likely that the product and/or the product’s cover
will age more rapid.
Caution!
Do not use aggressive or abrasive
cleaners, or sharp objects to clean the cushion.
Caution!
Do not place the topside of the Vicair
O2 cushion against the glass of the washer door.
INSTALLATION
Warning!
Vicair B.V. recommends to install the
Vicair Multifunctional O2 back under direct
supervision of a therapist or technical advisor.
Warning!
Using the Vicair Multifunctional
O2 back may affect the static and dynamic
behaviour of the wheelchair. Check and test the
balance and stability of the wheelchair with the
aid of your therapist or technical advisor.
Notice!
Always use cushion with cover.
Notice!
Make sure that the wheelchair seat is
clean and degreased.
Notice!
After installation you can remove the
back support cushion from the back shell by
simply pulling it off the hook and loop strips.
Notice!
The design of the cushion compartment
layout is based on the natural curves of the
spine. When installing the Vicair Multifunctional
O2 back ensure that the bottom of the back
support cushion is placed adjacent to the top of
the wheelchair seat cushion.
EN
Summary of Contents for MULTIFUNCTIONAL O2 BACK
Page 1: ...USER MANUAL...
