6 • VibrationVIEW Quick Start Guide
Setting Up The Hardware
VR10500
| Connecting the Unit
Set up the computer in the conventional configuration with power cables,
mouse, keyboard, and monitor.
To connect one VR10500 unit:
1. Connect the VR10500 network port to the dedicated network card
on the computer using an Ethernet cable (included).
2. Connect the power cord to the VR10500. The power input will
automatically switch for voltage 90VAC to 250VAC and 50/60 Hertz.
3. Connect the shaker amplifier’s input to the Drive output connector on
the rear panel of the VR10500.
4. Connect an accelerometer to channel 1 on the front panel. Other
accelerometers can be connected to channels 2 to 16.
5. Turn on the VR10500.
