III. Display Explanation
:Low battery indication : Zero indication
:Stable indication :Negative indication
:Net weight :Gross weight
:Counting mode unit : GN ,Mo, oz, ozt, ct, kg, g, dwt
:low preset limit value : High preset limit values
:The range between high and or low limit weight values
: Accumulate : Sample too Small
: Unit Weight too Small
IV. Connection between Sensor and Instrument
Instrument and sensor are connected by the five core aviation
plug. The function of each pin is as follow:
2
(VI) Counting function
Press the key to the sample size (10, 20, 50, 100,
200, 500 and 1000 pieces), put the sample number on the scale
and press the key, when the scale is stable, the display
shows the present quantity on the platter.
Press the key to return back the weighting mode.
NOTE：
<1>.
SAMPLE TOO SMALL: Sample is less than 10 divisions.
(The minimum sample weight = 10d)
<2>.
UNIT WEIGHT TOO SMALL:
Unit weight is less than 1/5
of a division.
Under such conditions, the scale can still work, but may result in
deviation.
The larger the sample size, the more accurate the unit weight.
(VII)
Accumulating
Place the object onto the scale and stable, press key to
“Add” and then show the accumulate number of weighing and
accumulated weight.
Recall the accumulated value
Press the key to recall the accumulated value.
Clear the accumulated value
Press the and key to clear the accumulated value.
NOTE：The totaling function can be used up to a maximum of
99 times with 6 digits maximum
.
If the accumulated value is extra the range, it appear
“ADDOL” Press to exit.
7
