Vibra SJ-1200CE, Operation Manual

Page: 12 / 36

9
3.2 Operation Check
1 Turning on the power
*
When the balance has the AC
adapter connected, it displays [
＊
].
Pressing the On/Off key
The display section lights up, and
the balance is ready for operation.
2 Checking the display Check to see if the display has any
missing indications or unlit parts.
A few seconds after startup, the
indication is reset to zero.
（
When the balance is sealed
）
 
After every segment lights,[


] appears Adjust Zero point and
Weight display appears.
If something is loaded, the display
does not change after [
 
] In
this case, remove the load.
3 Switching the measurement mode Press the Function key.
Each time the key is pressed, the
unit of measurement changes, as
indicated.
※
The balance is shipped from the
factory with the following switching
sequence: [
g
]
→
[ct]
→
[Pcs]
→
[%]
→
[
g
]
→
· · ·
※
[ct] is not available for
SJ-6200CE & SJ-12KCE
4 Verifying changes in the read-out indicator Press the measurement pan lightly
and make sure that the read-out
indicator changes.
Also, ensure that the read-out
indicator is reset to zero when you
release your hand.
5 Turn off the power
*
Press the On/Off key to turn off the
power. Only the [*] mark in on the
display.
Pcs
  %
  g
 g
 g