Vibra SJ-1200CE, Operation Manual

Page: 17 / 36

14
☆
3

[Pcs]
☆
4

[%]
Setup of units of
measurement to
be displayed



☆
5

Unit not set

Disable
Display of the
auxiliary scale
interval
 
※
4 ☆ 
Enable (

is the auxiliary scale interval.)
Note: The auxiliary-scale-interval place does not
represent a verification scale interval. Use it
only as a reference value.

No output is made while the auxiliary scale interval is
displayed.

Output is made even while the auxiliary scale interval is
displayed.
Output format
while the auxiliary
scale interval is
displayed

※
5
☆ 
Output is made with “/” added to the left of the
auxiliary-scale-interval place.
※
1 Setting is effective only when optional RS232C is used.
※
2 Can be set only for a model on which the balance is not sealed. For a model on which the balance
is sealed, only the units set when the balance was unsealed are effective.
☆
1
〜☆
5: default
factory settings [

]
〜
[

]
※
3 Not available in SJ-6200CE and SJ-12KCE.
※
4 Applicable only in SJ-620CE & SJ-6200CE
※
5 Displayed only in SJ-620CE & SJ-6200CE, when unsealed.
4.3 Interface Section
Displayed when [
  
] is set to [

] or [

]
Item Set Value Description

Stop output

Output continuous at all times

Output continuous if stable (stop output if unstable)

Outputs once by pressing Memory key (irrespective
of whether stable).

Outputs once if stable. Outputs if the balance is stable
when a sample is loaded after the preceding sample
has been removed and the balance indicated zero, or
less.

Outputs once if stable, and stops output when unstable.
Even if the sample is not replaced, the balance is output
once when it stabilizes next time (including the zero
indication).

Outputs once if stable, and outputs continuously when
unstable. Even if the sample is not replaced, output of
the balance stops when it stabilizes after being output
once.
Output Control
 
☆ 
Pressing Memory key causes the balance to output
once when stable.
☆ 
1200 bps

2400 bps

4800 bps
Baud Rate
 

9600 bps
☆ 
None

Odd
Parity
 

Even
Displayed only when [
  
(7-digit numeric format)] is specified.
☆
denotes a factory-setting
※
The data interval in continuous output mode is 0.1 to 1 second. (The interval varies depending
on weighting conditions and other factors.)