87
Appendix 5
Scale operation with password control function
This chapter describes how to use the scale with “8-5-2 Password control”. This function is useful for
setting different authority for each user/guest.
Appendix 5-1
User’s authority setting
1
Power on the scale.
“Self-check”
Enable the <642 PASSWORD> and register
the administrator password in <643 SET
ADMIN PASS>, then power-off the scale.
Press [On/Off] key, then the scale shifts to
User login mode after start-up operation.
2
Go to the Administrator login mode.
Press [4] key to go to “Administrator login
mode”.
<
> is indicated on the 7-segment
display.
3
Select the user to set the authority.
Select the user
0
：
Guest user
1
：
User 1
2
：
User 2
USER
：
Shift to the User login mode
4
Input the administrator password.
Input the administrator password by
pressing [1]-[4] keys.
Each digit increments as “0, 1, …, 8, 9, 0” by
pressing each functional key.
First digit from the left
: [1] key
Second digit from the left
: [2] key
Third digit from the left
: [3] key
Fourth digit from the left
: [4] key
5
Start up the scale.
Press [Zero] key.
When the password is authenticated, the scale
starts up.
6
Register the user password.
Refer to “8-5-2(2) User password registration”.
(1) The user password of which selected in Step 3 is registered.
(2) When “0: Guest user” is selected at step 3, skip this step.
