26
F
F
F
u
u
u
n
n
n
c
c
c
t
t
t
i
i
i
o
o
o
n
n
n
s
s
s
This scale is provided with the functions shown in the table below. These functions can be adjusted according to
your work conditions.
⇒
Refer to “Checking the Set Value” on page 28 and “Changing the Setting” on page 29.
1
Functions and How They Work
2.1 Basic Functions
* Shaded parts indicate factory default settings.
Functional item
Display
How the function works
OFF: Disables the function.
Enables the addition function.
Additional
Function
Enables the limit function.
⇒
Refer to Section 2.2 “Details of the
Limit Function.”
OFF: Disables
this function.
Autozero
(Zero tracking)
ON: Enables
this function.
* This function maintains the correct zero point
automatically if the zero point fluctuates slightly.
Response Speed
Display speed
Fast
Slow
Stability
Judgment
Judgm
ent
p
recisi
on
Loose
Strict
Judgm
ent
time
Fast
Slow
OFF: Disables this function (for continuous
use).
Autopower-off
This function can be
used only for the
dry-cell battery type
ON: Turns off the power automatically when
approximately 3 minutes have elapsed.
Reserved (Output is stopped.)
6-digit format
Interface
7-digit format
Operation by contact inputs
External Taring
Operation by commands input from a PC or other devices
Disables the ON/OFF key.
ON/OFF Key
Control
Enables the ON/OFF key.
Outputs the actual scale interval in the normal format.
Output Format of
Actual Scale
Interval *1
Outputs “/” before the actual scale interval.
* The functions from the Interface “
” and after are not provided for the dry-cell battery type.
When you select the Additional Function “
” or the Interface “
” or
“
,” refer to the description on the next page.
*1 This function is not displayed on the GZII-30KCEx model. It is displayed only when the lock switch is
turned off.
∗
If “
” or ”
” is set, the displayed values may flicker.
∗
If the scale is influenced by wind or vibration, set “
”
or ”
.”
∗
This function indicates, by
the status of unit display,
whether the measurement
is stable or unstable.
∗
If the unit display is
flickering, the
measurement is unstable.
