Vibra AJ-1200E, Operation Manual

Page: 18 / 47

15
5. Switching Function for Units of Measurement
Pressing the Function key allows the user to switch the unit of measurement to [g], [ct], [%], and so on.
During setup, a maximum of five different units can be registered for use in function setup mode.
5.1 Switching Units of Measurement
Switching the units of measurement to be displayed
g
Pcs
%
Press the Function key.
Each press advances through the units
of measurement to be displayed.
※
The balance is shipped from the
factory with the following default setup:
[g]
→
[ct]
→
[Pcs]
→
[%]
→
[g]
→
· · ·
5.2 Setup of Units of Measurement
When values [

] to [

] are entered prior to use, the desired unit of measurement to be
displayed can be chosen simply by pressing the Function key. For more information on the units of
measurement that can be set here, please refer to “4.2 Description of Functions” on page 13.
Example: To change the default factory settings to pound units, use [

] in the factory
settings.
1 Display the function item [

]

Press and hold down the Function key.
Release the key as [

] appears
on the display.
The function setup mode is now
activated and the first item is displayed.
Press the Function key several more
times, until [

] appears.
2 Setting the unit to a pound


Press the Zero/Tare key several times
to specify [

].