Viavi Xgig, User Manual

Page: 121 / 468

Capture and Trigger Setup Chapter 4, Xgig TraceControl Capture Configuration
Xgig Analyzer User’s Guide 107
Capture and Trigger Setup
The Capture and Trigger Setup tab is where you define your capture filters and your transitions
to capture the information you are looking for. This window consists of two panes, the overview
pane and the editor pane. The editor pane has two editors, the Capture Filter Editor, which is active
when you are working with a state and the Transition Editor, which is active when you are
working with a transition. Use the editors to filter out the data you do not want. The overview pane
lists all the capture filters and transition settings you have defined for each state or transition.
Overview Pane
The overview pane shows the entire capture as elements arranged in a flow chart. It shows the
state(s) of a capture, their associated transitions, and the flow between the elements. All the states
are color-coded. A state and all the transitions originating from it are the same color. Transition
lines are the same color as the destination state. Depending on the trigger mode you have selected,
the overview pane will contain the following elements:
• States
• Transitions
• Destination indicators
• Transition Lines
• TTL selection
• Domain Triggered
• Post Trigger Fill %
• Terminators