manualshive.com logo in svg

Viavi Seeker MCA III, User Manual

Share
Download
Viavi Seeker MCA III User Manual Download Page 7

MCA III User’s Guide

22137817, Rev. 000

Feb 2020

7

Contents

About this Guide 

9

Purpose and scope ..................................................................................................9

Assumptions ..............................................................................................................9

Technical assistance .................................................................................................9

Conventions ............................................................................................................ 10

Typographical conventions.......................................................................... 10

Keyboard and menu conventions ............................................................... 11

Symbol conventions ....................................................................................... 11

Safety definitions ........................................................................................... 12

Precautions ...............................................................................................................13

What ships with the Seeker MCA III? ............................................................... 14

Preparation for use ................................................................................................ 14

Chapter 1  

Quick Tour 

15

About the Seeker MCA III .................................................................................... 16

Optional software ................................................................................................. 16

A guided tour of your Seeker MCA III ...............................................................17

Front view .........................................................................................................17

Side view ...........................................................................................................17

Rear view .......................................................................................................... 18

Display overview ................................................................................................... 19

Startup screens ............................................................................................... 19

Shutdown Screen ........................................................................................... 19

Display navigation .........................................................................................20

Using the Select button .....................................................................20

Home and Status screens ..................................................................20

Home and Status screens (continued) ...........................................22

GPS Status screen ................................................................................23

Ethernet Status screen .......................................................................24

Wi-Fi Status screen ..............................................................................26

Wi-Fi Test screen ..................................................................................28

Summary of Contents for Seeker MCA III















































Reviews:

No comments

Brands by name

Popular brands

Load more brands