MCA III User’s Guide
22137817, Rev. 000
Feb 2020
44
Chapter
3 Appendix
Bootloader messages
The screens shown below are displayed on the Seeker MCA III display screen to indicate an
error with the Seeker MCA III bootloader software.
Screen
Description
There is a hardware failure of the flash memory inside
the Seeker MCA III, return the unit to the factory for
repair.
The Seeker MCA III has failed to load both the primary
and factory backup applications. This message is
displayed when the flash memory inside the Seeker
MCA III has been corrupted or erased, return the unit to
the factory for repair.
The Seeker MCA III is attempting to load the factory
backup application. This message may occur after a
firmware update has failed to properly update the
primary application. Press the Select button on the back
of the MCA III to load the factory default application
and then retry the firmware update again to the clear
this message.
The Seeker MCA III is erasing the application during a
firmware update.
The Seeker MCA III has failed to erase the application
during a firmware update. Retry the firmware update
again to the clear this message.
The Seeker MCA III is loading the application after a
firmware update.
The Seeker MCA III has failed to load the application
after a firmware update. Retry the firmware update
again to the clear this message.
