Chapter 2
Configuring the reflectometry test
Configuring the test in Expert OTDR
36
User Manual
700MAN201 Rev. 002
Saving OTDR configuration in a file
Once File and Measurement parameters have been configured, those parameters are
kept in memory and can be saved in a configuration file.
This configuration file can then be recalled and reused in two cases:
•
in order to be applied when acquisition in SmartTEST mode is performed.
•
in order to be recalled for future acquisition in Expert OTDR
To save parameters in a configuration file:
1
If necessary, press
Setup
to return to
Setup
menu.
2
Select one parameter in one of the setup page (acquisition, link..)
3
Press menu key
.
The onscreen keyboard displays
4
Enter a name for the configuration file (max. 20 characters).
F
ILE
Filenaming
Auto filenaming
Cable_Id][Fiber_Num]_[Lambda][Direction]
Auto Store
Yes
NOTE
Configuration file is saved by default in the directory
disk/config
.
OTDR New IHM rev002.book Page 36 Jeudi, 5. mai 2022 11:50 11
