manualshive.com logo in svg

Viavi MSAM, Manual

Share
Download
Viavi MSAM Manual Download Page 24

Chapter 1  

Basic Testing

Step 3: Connecting the instrument to the circuit

Data Communications and Diphase Testing Manual

Page 8

21148872, Rev. 002

January 2016

The self test is complete.

Step 3: Connecting the instrument to the circuit

After you configure a test and perform a self test, you are ready to connect the instru-

ment to an access element on the circuit. Before connecting to the circuit, verify that the 
DATACOM PIM is inserted securely in your MSAM, and that you have the correct cable 
designed to be used with the universal connector provided on the PIM, and with the 
interface you are testing.

Viavi offers adapter cables to be used with your instrument. Different cables are used 
depending on the interface; each provides a DCE and DTE connector. Each of the 
emulation cables has a yellow band. When available, monitor cables will be identified 
using a blue band. All cables are six feet long.

Detailed instructions for connecting the instrument to the interface are provided in the 
Getting Started manual that shipped with your instrument.

Step 4: Starting the test

After you configure a test, perform a self test, and connect the instrument to the inter-

face, you are ready to start the test. Each time you start a test, the instrument clears 
existing test results and alarms, and then starts the test.

To start a test, do the following:

•

Press the 

Restart

 key.

Table 5

Datacom Adapter Cables 

DCE/DTE Emulation

Viavi Part Number

RS-232, V.24, EIA-530, or EIA-530A, and MIL-188C

CB-21148994-002

RS-449, V.36, or MIL-188-114

CB-21144332-002

V.35

CB-21148995-002

 X.21

CB-21149199-001

Datacom PIM Clock Adapter Cable

CB-DCCLK

NOTE: Purchasing cables

To obtain adapter cables, contact your local Viavi sales office, or contact Viavi 
through the company web site at 

www.viavisolutions.com

.

Summary of Contents for MSAM











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands