manualshive.com logo in svg

Viavi MSAM, Manual

Share
Download
Viavi MSAM Manual Download Page 13

About this Manual

Data Communications and Diphase Testing Manual

Data Communications and Diphase Testing Manual

January 2016

21148872, Rev. 002

Page xi

•

MSAM (Multiple Services Application Module (MSAM))

 — Referred to generi-

cally as “the instrument”. The MSAM provides testing functionality for the base 
unit.; the PIMs inserted into the MSAM provide the physical connectors.

•

PIM

 — The physical interface module (inserted into the MSAM) used to test a 

variety of services. PIMs provide the connectors required to connect to a circuit 
for testing.

Data Communications and Diphase Testing Manual

This is the Data Communications and Diphase testing manual for the MSAM. The 
manual is application-oriented, and provides instructions intended to help you use the 
instrument to verify network connectivity and performance for a variety of data commu-
nication interfaces. It also provides detailed test result descriptions and troubleshooting 
topics.

Use this manual in conjunction with the following manuals:

•

6000A Base Unit User Manual

. This manual provides an overview, specifications, 

and instructions for proper operation of the 6000A base unit.

•

8000 Base Unit User Manual

. This manual provides an overview, specifications, 

and instructions for proper operation of the 8000 base unit.

•

Dual Module Carrier, Transport Module, and MSAM Getting Started Manual. 

This 

manual provides an overview of the connectors provided on the hardware compo-
nents, instructions for connecting to the circuit you are testing, and specifications 
for the hardware components.

•

Remote Control Reference Manual

. This manual provides the remote control 

commands used when developing scripts to automate your testing. This manual 
is provided electronically on the USB stick or CD that shipped with your instru-
ment.

NOTE:

Many applications also require you to purchase and install certain testing 
options; others require specific cables to connect to specific interfaces for 
testing.

Summary of Contents for MSAM











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands