Chapter 1
Optical Spectrum Measurement
Safety information
8
MTS / T-BERD 5800 • COSA-4055 • User Manual 2016.01
Safety instructions for class 1 laser products
Safety instructions for class 1M laser products
Optical
surfaces
Dust and fingerprints can damage optical surfaces, particularly when
such surfaces are pressed together. To protect the instrument and
cables, every cable should be cleaned before it is connected to the
instrument. The optical connectors on the instrument should also be
cleaned regularly.
–
Before cleaning the optical surfaces please pay attention to the
notes on safe handling of fiber optical cables and optical
connectors.
–
To clean the optical connectors, remove the test adapters, dab the
end surfaces of the plug pins with cleaning tape and blow out the
test adapter using compressed air.
– Always fit protective caps to optical connectors that are not in use.
Ventilation
Please refer to the user manual of the MTS-5800 Base Unit for further
information.
Battery
operation
Please refer to the user manual of the MTS-5800 Base Unit for further
information.
CAUTION
Invisible laser radiation
Class 1 laser products are defined as safe in normal operation under
reasonably foreseeable conditions.
Although the laser radiation from a class 1 laser product will not
harm eyes or skin, follow the general laser safety instructions (see
General laser safety instructions) to ensure maximum safety
when working with laser sources.
WARNING
Invisible laser radiation
Viewing the laser output of a class 1M laser product with certain
optical instruments (for example eye loupes, magnifiers,
microscopes) within a distance of 100 mm may pose an eye hazard.
Do not expose eyes to the beam within a distance of 100 mm.
Do not view the laser output with optical instruments.
Follow the general laser safety instructions.
Summary of Contents for BN 2301/01
Page 1: ...MTS T BERD 5800 COSA 4055 User Manual ...
Page 47: ......
