Viavi 10/100 Copper nTAP User Manual Download Page 28

Page: 28 / 30

10/100 Copper nTAP - 28

Chapter 9: FCC compliance statement

Specification

Certification

Emissions

FCC Part 15 Class B

CE Mark

EN61000-3-2, EN55024, EN55022A

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

♦

Reorient or relocate the receiving antenna.

♦

Increase the separation between the equipment and receiver.

♦

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

♦

Consult the dealer or an experienced radio/TV technician for help.

Summary of Contents for 10/100 Copper nTAP































Search results

Summary of Contents for 10/100 Copper nTAP

Reviews:

Related manuals for 10/100 Copper nTAP

Brands by name

Popular brands

Viavi 10/100 Copper nTAP, User Manual

Search results

Summary of Contents for 10/100 Copper nTAP

Reviews:

Related manuals for 10/100 Copper nTAP

Brands by name

Popular brands