Page
19
of
23
9.6 MasterMute / ON - OFF
The use of the function MasterMuste sets the Autrix to complete silence.
Over the „MUTE“ key, it can be turned on or off.
This key works after the Toggle principle:
pressing the key several times changes at a time the status between:
mute (muting) and unmute (cancel muting)
pressing the key several times changes the status between:
- mute (muting)
- unmute (cancel muting)
The actual state is shown at the LED „MUTE“ (icon „crossed out speaker“)
10
Installing and connecting the device
The device is mounted in a 19" rack. A free SCHUKO® socket is required for mounting.
• Connect the bus cable.
• Connect the LF inputs and loudspeaker outputs.
• Connect the power supply cable.
The Programming button and LED and the interfaces are only accessible from the rear side of
the device. If possible, load the physical address and application software into the device before
final mounting.
Because of the fact, that the device doesn´t come with a main switch, it should be secured separately through
a proper and appropriate marked domestic installation fuse located in the electric dirstributor.
