Page
17
of
23
8.2 Sound settings: Save
Object
Designation
Function
Data type
10
Save sound settings
trigger
trigger
1.017 (0-1)
The sound settings can be saved permanently using these communication objects.
8.3 Sound Settings: Reset
Object
Designation
Function
Data type
11
Sound settings reset
trigger
trigger
1.017 (0-1)
The default sound settings can be recalled using these communication objects.
9
Operating via frontpanel
The Autrix also can be controlled via the frontpanel keyboard, independently of the KNX building bus.
The following functions are available:
-
switching the amplifier board On/Off
-
volume setting
-
routing (assigning an input source to an amplifier zone)
-
adjust bass settings
-
adjust trebel settings
-
master mute ON/OFF
figure: frontpanel
9.1 Power / ON - OFF
Via this button the Autrix can be switched on or off. The green „power“ LED shows the current state.
In off state the Power-LED is also off. The Autrix is than in a stand-by-mode and can be turned on again at
any time. During the stand-by-mode the Autrix can also be turned on again by the KNX-interface.
