Page
16
of
23
7.3 Audio input n: Setting the input gain - value
Object
Designation
Function
Data type
192
Input 1 input gain
value
value
5.001 percent (0-100)
195
Input 2 input gain
value
value
5.001 percent (0-100)
198
Input 3 input gain
value
value
5.001 percent (0-100)
201
Input 4 input gain
value
value
5.001 percent (0-100)
The input gain of the appropriate audio input can be controlled via these communication objects. Using the
data point, the input can be set directly to a specific input gain.
7.4 Audio input n: Input gain - status
Object
Designation
Function
Data type
193
Input 1 Input gain
status
status
5.001 percent (0-100)
196
Input 2 Input gain
status
status
5.001 percent (0-100)
199
Input 3 Input gain
status
status
5.001 percent (0-100)
202
Input 4 Input gain
status
status
5.001 percent (0-100)
The Autrix sends the status value of the input gain of the appropriate audio input back via these
communication objects.
8
KNX object description / Setting (save/reset)
8.1 Explanation
In the as-delivered state, the Autrix is already assigned with a default sound setting. These settings are
suitable for most requirements.
If necessary, the sound settings can be adapted to construction-side conditions using the named KNX
communication objects.
Such adaptations can be saved permanently in the Autrix via an additional data point. This ensures that,
after voltage returns, the Autrix works with the adapted sound settings.
The data point "Reset" allows restoration of the factory sound settings.
In order to save these permanently to the Autrix, the above-mentioned data point can be used to save sound
settings.
During the saving operation (approx. 5 seconds), the Autrix does not react to bus telegrams.
