Viatron AA800EZe, User Manual

Page: 10 / 36

10
AA800EZe rev.03
AA800EZe
SYSTEM INITIALIZATION 3.
3.1. Installation Wizard
The Installation Wizard guides you through
the process of initializing your Agri-Alert sys-
tem. When it is launched, the Wizard displays
all setup menus in turn. You can choose to
perform or to skip each programming step
and can exit from the Wizard at any time.
To run the Installation Wizard:
Select: 1.
• Main Menu
• Install Programming*
• Use Program Wizard
* Accessible with the Installer or Master password
only (see section 3.2).
Welcome to Wizard
Installation
1 Set Time & Date
2 System Options
3 Install Zone
4 Install Phone
Start
All programming steps are displayed. 2.
Press the pound key “#” to launch the 3.
Installation Wizard or press Back to cancel.
Follow the prompts to configure your 4.
Agri-Alert system.
Programming steps —
Here is a list of all
programming steps of the Installation Wizard.
Refer to the proper section of this manual to
get information about each of them.
Default Passwords:
Master 0800
Installer 0801
User 1 1111
User 2 2222
User 3 3333
User 4 4444
User 5 5555
User 6 6666
User 7 7777
User 8 8888
IMPORTANT
Choose easy-to-remember
passwords and write them
down in a safe place!
Setting the Passwords 3.2.1.
Select: 1.
• Main Menu
• System Auxiliaries
• Password Management*
* Accessible with the Installer or Master password
only (see section 3.2).
Password Management
Current User Installer
Enable password Yes
Installer 0801
User 1 1111
User 2 2222
Back
Set the following parameters: 2.
Enable password — Select
“Yes”
to use the
password protection or select
“No”
to dis-
able it.
Users — Use the numeric keypad to specify
the password of each users.
• Time and date (section 3.3)
• System options
Units of measurement (section 3.4)
Speaker volume (section 3.6)
Passwords (section 3.2)
• Setup Zones (section 3.7)
• Outdoor Temp. compensation (sec. 5.3)*
* Accessible if a zone uses the outside temperature
sensor (sec. 3.7).
• Phone numbers (sections 4.3 & 4.4)
• Burglar arming options (section 5.4)
• Siren options (section 3.5)
3.2. Password
The Agri-Alert can use a password protection
to limit access to certain menus and can iden-
tify 4 different levels of users (the password
protection is optional):
LEVEL 1– System:
This user level is automatically selected after
5 minutes of inactivity. It gives a read-only
access to the current condition menu and to
the system version menu.
LEVEL 2 – User:
This user level gives access to all functions of
the controller except for the
“Install Program-
ming”
menu. Up to 8 different password can
be assigned to the users.
LEVEL 3 – Installer:
This user level gives a read/write access to
all functions of the system, except for the
event buffer .
LEVEL 4 – Master:
This user level gives a read/write access to all
functions of the system, including the event
buffer menu.