manualshive.com logo in svg

Viatom Checkme, User Manual, Page: 29 / 45

Share
Download
Viatom Checkme User Manual Download Page 29

28 

 

5.

 

Tap 

  to finish the setting. 

   

5.5

 

Enabling/Disabling Quick ECG 

1.

 

In the Settings menu, choose <

General

>.   

2.

 

Tap <

Quick ECG

> to enable or disable this function. 

 

5.6

 

Changing Sound Volume 

In the Settings menu, tap the <

Volume

> area to change volume directly. 

“X” means the volume is turned off. 

 

5.7

 

Changing Temperature Unit 

In the Settings menu, tap the <

Thermometer

> area to change between 

Celsius degree (°C) and Fahrenheit degree (°F). 

 

5.8

 

User Management 

To use the Daily Check measurement, you must create your account. If the 
Daily Check measurement is used by more than one user, then each user 
must create his/her own account.   

 

To create a user account: 
1.

 

In the Settings menu, choose <

User Management

>.   

 

2.

 

Tap a “+” button to open the menu below. 

3.

 

Tap each button to edit corresponding information. Make sure you 
input  the  correct  information,  especially  your  height,  which  may 
affect the accuracy of your blood pressure readings.   

Summary of Contents for Checkme














































Reviews:

No comments