9
remove the hair from the electrode part, then clean the skin with
water, and then apply the electrode after drying.
e. Do not speak and remain still during the measurement. Any
movement will affect the measurement results.
f. Please sit when measuring possible.
3.4.2 Measuring step
1
）
After selecting a measurement method, the device detects
that the ECG signal is automatically turned on, the signal light
changes to the green and flash , the device starts to measure, and
the device will emit a "drop" heartbeat sound.
2
）
When the measurement is over 30 seconds, the device will
emit a short beep, at which point the measurement can be ended
and the device will complete a 30 second-15 minutes data save.
3) When the patient continuous contact exceed 15 minutes, the
device measurement time is up, the device automatically turns
off, and the signal light changes to Green and flash(5 seconds
apart).The device will complete a 15 minute data save.
3.5 Data view
After the measurement is completed, the data measured in the
devicd can be transmitted to the mobile equipment for viewing
by Bluetooth.
Steps for data export by Bluetooth:
1) Turn on the Bluetooth function of the mobile equipment
to
ensure that the Bluetooth function is turned on.
2) By pairing on the mobile equipment , after the pairing is
successful, the indicator light will turn into a steady blue light.
3) According to the prompts of the mobile equipment, data
export is implemented.
Precautions:
The device can store up to 10 part measurement data and up to
20 minutes of measurement data .In order to ensure that every
data you collect is able to be viewed smoothly, please export the
